Using Matter Of Belt Type Concrete Batching Plant

When using a simple type concrete mixing station must pay attention to the items:

 

1, concrete mixer simple concrete mixing station should be installed on a solid pedestal. When long-term fixed anchor bolts should be embedded in the short-term use, it should be on the base flat wooden pillow and find stable.

 

2, concrete mixer console, should enable the operator to see all parts of the work. Electric mixer console, should rubber mat or dry wood boards.

 

3, wiring and electrical components of the motor firm, protect access to zero or ground resistance compliance.

 

4, before the job should be carried out hopper lift test, should be observed and confirmed the clutch, brake flexible and reliable.

 

5, each transmission, work, brakes are tight and reliable, open gears, pulleys, etc. are protective cover.

 

6, the mixer operation, when the bucket is raised, and forbids any person or by staying in the hopper, when you need servicing or cleaning material in the hopper pit should be after bucket elevator or insert a pin locked with chains.

 

7, the stirring cylinder feeding should be in operation, adding new material should be first stirred original concrete cylinder can be carried out after all unloading.

 

8, after the job, coping portable concrete mixing plant  comprehensive clean-up, when the operator needs to enter the tube, and must be cut off or remove the fuse and lock the switch box, put "DO NOT TURN" signs, and have someone outside care, clean-up work space, cut off the power and lock the switch box.