The using process concrete mixer machine

Concrete mixer machine models are diverse, concrete mixer models including: JS series, JZM series, JZC series, JD / JDC / JDY series

The using process concrete mixer machine:

1. The concrete mixer after startup should wait for the normal operation of electric motor, and then put total clutch, working free first 2-3 minutes, such as concrete mixer mixing drum rotation stability, not to beat, not wandering, no exception, door opening and closing of hopper and upper and lower are flexible, before work.

2, the cement mixer operation of the operator must wear masks, sleeves, operation is strictly prohibited repair and maintenance, not allowed to use tools to stir the barrel within the mortar or out of the material.

3, when the sudden power failure or malfunction occurred in concrete mixer running at full capacity, should first pull the switch switch, with human will be concrete mixing drum to clear clean.Do not allow the load to start the mixer, in case of damage to the motor current is too large when it is started.

4, the operation of the electric concrete mixer is easy to stand in the mat on the operation of the console, the concrete mixer power of more than 5 kilowatts, must be installed starter. At start-up, such as the occurrence of arc, spark or sudden drop in voltage, etc., should immediately stop the start, cut off the power, to check and repair.

5, when the twin shaft concrete mixer hopper, it is prohibited in the bottom of the hopper work or traffic; hopper foundation pit needs to be cleaned or under the hopper check, must be in contact with the operator and the hopper with the chain fastened before proceeding.