Concrete batching plant inspection

　　As any other machines, a concrete batching plant gets worn with the passage of time. Regular concrete batching plant inspection and maintenance are indispensable. If you are not an expert in this respect, you might as well follow the steps as below at the very beginning of your working days with a concrete mixing plant.

　　1. Check the working conditions of the lubrication points of each rotating part every day and replenish the lubricant in time.

　　2. Check the amount of lubricating oil in the lubricating oil cup of the mixer every day, and replenish the lubricating oil in time.

　　3. Check the oil level of the oil mister on the air system once a week, and use a lubricant with a viscosity of 2.5 ~ 7 ° E.

　　4. Open the drain valve once a day before starting up and after shutting down to discharge the water condensed in the air compressor and the air storage tank.

　　5. Fasteners (such as bolts and nuts) should be checked weekly for looseness. When they are found to be loose, they must be tightened in time, especially some parts subject to variable amplitude load.

　　6. Daily check the equipment of the water supply, gas supply and admixture system regularly every day.

　　7. Check whether the electrical control system and various instruments are normal every day.

　　8. Check whether the mixing shaft and the whole of the concrete mixer are clean every day. If too much concrete is condensed on the mixing shaft, it must be manually cleaned.

　　9. Clean or replace the filter in the dust collector of the powder tank every six months.

　　10. If the downtime is more than one week, the materials in each measuring hopper must be emptied, and the concrete mixer and the discharge hopper should be cleaned to prevent the materials from stagnation.

　　Haomei supplies batching plants from 25m3 to 180m3. In particular, hzs60 concrete batching plant is our hot product. If you want to know more about concrete batching plant inspection, welcome to contact us!